Unichip 2.5 / 3.5 Bar Turbo Module

( CODE: UnichipTurboModule )

£87.76

Our Unichip Turbo Module measures boost, which the Unichip can then use to control extra injectors or other devices.

Unichip Turbo Module Selection
  Add to basket

Overview | Unichip Turbo Modules

  • Unichip Europe's Turbo Modules are used in conjunction with a Unichip Module - typically used alongside an aftermarket induction kit. When installed, you'll be able to input a boost pressure signal when one is typically not available, or is too small a range for the intended turbo upgrade.
  • These modules include an in-built high current driver for use with either a boost control solenoid, or an additional fuel injector. This is all controlled via the Unichip Module, with advancing options also available.

-

Technical Information

  • 2.5 Bar Turbo Module:
       - Sensor reading (2.5 Bar) | -1.00 - +1.50 Bar gauge pressure.
  • 3.5 Bar Turbo Module:
       - Sensor reading (3.5 Bar) | -1.00 - +2.50 Bar gauge pressure.

-

Your Order Contents:

  • 1 x 2.5 Bar Unichip Turbo Module.
    or
  • 1 x 3.5 Bar Unichip Turbo Module.
    +
  • 1 x Unichip Turbo Module Wiring Kit.

-

 

£150.00
0
Shopping Basket
X